Cisco 7921G - Manual (Page 3)

3-3
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-02
Chapter 3 Setting Up the Cisco Unified Wireless IP Phone 7921G
Before You Begin
Methods for Adding Phones to Cisco Unified CallManager
Before installing the wireless IP phone, you must choose a method for adding
phones to the Cisco Unified CallManager database. Some methods require
entering the media access control (MAC) address of the phone.
Table 3-1 provides
an overview of these methods.
The following sections describe these methods:
• Adding Phones with Auto-Registration, page 3-4
• Adding Phones with Auto-Registration and TAPS, page 3-4
• Adding Phones with BAT, page 3-5
• Adding Phones with Cisco Unified CallManager Administration, page 3-6
Table 3-1 Methods for Adding Phones to the Cisco Unified CallManager
Database
Method
Requires MAC
Address?
Notes
Using auto-registration No Results in automatic
assignment of directory
numbers
Using auto-registration with
the Tool for Auto-Registered
Phones Support (TAPS) No Requires auto-registration and
BAT; updates information in
the Cisco Unified IP Phone
and in Cisco
Unified CallManager
Administration
Using Bulk Administration
Tool (BAT) Yes Allows for simultaneous
registration of multiple phones
Using the Cisco
Unified CallManager
Administration only Yes Requires phones to be added
individually