Reznor RIH Series Parts Manuals - Manual (Page 2)

PN 272513R11, Page 2
Replacement Parts - High-Intensity Infrared Models RIH/RIHV
65
66
65
CODE P/N Description CODE P/N Description
60
271822 Main Gas Valve (120V) - VR4205M1324
(natural & propane)
66
Conduit, 3/8" Greenfield with Anti-Short Bushings
271823
Replacement Valve Kit - order to replace
previously used valve 1/2 0002-42-
01536C01 A284, P/N 112044
112047 for RIHN30, RIHN60, RIHL50, #3802-95-
300-01
61 96010 Ignition Detection Control Replacement Kit,
#0001-22-046
112048 for RIHVN 100, RIHVL90, #3802-95-300-
02
62 96011 Wire Harness, #132084, Pkg R10 112049 for RIHVN 150, RIHVL 120, #3802-95-
300-03
63 112045 Ignition Detection Control Mounting
Bracket, #000K-1-016
112050 for RIHVN 160, RIHVN 200, #3802-95-
300-04
64 112046 Ignitor, #0002-42-110 67 96016 Air Flow Switch, #132081-2N, Pkg R15
(Not Shown)
65 112051 Angle Connector for 3/8" Greenfield,
#3802-95-302
Controls - All RIH/RIHV High-Intensity Infrared Models
Replacement Accessories
Thermostat (Option Cl34),
P/N 110252
115/24 Volt; 50-90°F Range;
nap Action Switch; Vertical
Mounting; Mfr #132026-1
Description Same as P/N
Chain - 50', 200 lb w/14 "S" Hooks Opt UE-1 95995
Chain Hanging Kit (See illustration.) Opt UE-2 110253
Stainless Flex Connector, 24", 7/8" OD
w/1/2 gas cock w/pressure tap
Option
UF-2
96000
Single-Stage Thermostat (shown below) Opt CL34 110252
A
D
B
C
Degree of Angle
Mounting
12” Length
Chain with
“S” Hooks
#5 “S” Hook
(typical)
Adjust
length
to change
mounting
angle.
Chain Hanging Kit, P/N 110253
Instructions:
1 ) Hang full length chain at desired height
and attach heater (C) with S-hooks.
2) Attach one end of the 11-inch length
chain with S-hooks to front of heater
(D).
3) Place other end of chain with
S-hook in hook (B) on the full
length chain.
4) Change degree of angle by
moving “S” hook at point B.
5) Check to be sure unit is level.
Crimp all “S” hooks closed.