Installation/performance check list – Reznor S5BP Users Manual User Manual
Page 20
Specifi cations & illustrations subject to change without notice or incurring obligations.
O'Fallon, MO | Printed in U.S.A. (06/10)
INSTALLATION/PERFORMANCE CHECK LIST
REFRIGERATION SYSTEM:
Was unit given 24 hr warm up period
for crankcase heaters?
YES
NO
Stage-1 Liquid Pressure (high side) ________________________
Stage-1 Suction Pressure (low side) ________________________
Has the owner’s information been
reviewed with the customer?
YES
NO
Has the Literature Package been left
with the unit?
YES
NO
INSTALLATION ADDRESS:
CITY ________________________
STATE ________________
UNIT MODEL # ________________________________________
UNIT SERIAL # _______________________________________
Unit Installed Minimum clearances per
Figure 2 (page 6)?
YES
NO
INSTALLER NAME:
CITY _______________________
STATE ________________
ELECTRICAL SYSTEM:
Electrical connections tight?
YES
NO
Line voltage polarity correct?
YES
NO
Rated Voltage: ___________________________________ VOLTS
L1-L2 Volts: _____________________________________ VOLTS
L1-L3 Volts: _____________________________________ VOLTS
L2-L3 Volts: _____________________________________ VOLTS
Avg. Volts: ______________________________________ VOLTS
Max. deviation of voltage
from avg. volts: ___________________________________ VOLTS
% Volt imbalance: ________________________________ VOLTS
Blower Motor HP: ________ Sheave Setting ___________# Turns
Has the thermostat been calibrated?
YES
NO
Is the thermostat level?
YES
NO
Is the heat anticipator setting correct?
(If Applicable)
YES
NO
709093A (Replaces 7090930)
¢7090936¤
IMPORTANT - This product has been designed and
manufactured to meet ENERGY STAR criteria for energy
effi ciency. However, proper refrigerant charge and proper
air fl ow are critical to achieve rated capacity and effi ciency.
Installation of this product should follow the manufacturer’s
refrigerant charging and air fl ow instructions. Failure to
confi rm proper charge and airfl ow may reduce energy
effi ciency and shorten equipment life. This Applies only
to 7.5 TON MODELS