Reznor R6GN Option - Installation - Manual Fresh Air Kit - Manual (Page 2)

O'Fallon, MO
7085010
Specifi cations and illustrations subject to change
without notice and without incurring obligations.
Printed in U.S.A. (10/05)
¢708501u¤
7085010
INSTALLER: PLEASE LEAVE THESE INSTALLATION
INSTRUCTIONS WITH THE OWNER
Installation
1. DISCONNECT ALL ELECTRICAL POWER TO THE
UNIT.
2. Remove all screws securing upper factory close off
panel. Discard original panel and reuse screws to
mount fresh air panel with damper plates (1). See
Figure 2.
3. Adjust close-off damper plates to desired opening.
(Depending on free air opening required plates may
have to overlap.)
4. Assemble hood side panels (2 and 3) to hood top (4)
using screws provided. See Figure 2.
5. Attach partial hood assembly to Fresh Air panel using
screws provided.
6. Slide fi lter (7) into bottom track of hood assembly.
7. Slide front cover under top panel lip and secure using
screws provided.
8. Restore all Electrical power back to unit.
1
2
8
4
5
7
6
3
Figure 2.