Chamberlain WD962KLD - Manual (Page 14)

14
INSTALLATION STEP 3
Attach the Rail to the Header Bracket
NOTE: (Optional) With some existing installations, you
may re-use the old header bracket with the two plastic
spacers included in the hardware bag. Place the spacers
inside the bracket on each side of the rail, as illustrated.
• Position the opener on the garage fl oor below the
header bracket. Use packing material as a protective
base. NOTE: If the door spring is in the way, you will
need help. Have someone hold the opener securely on a
temporary support to allow the rail to clear the spring.
• Position the rail bracket against the header bracket.
• Align the bracket holes and join with a clevis pin
as shown.
• Insert a ring fastener to secure.
HARDWARE SHOWN ACTUAL SIZE
Existing
Header Bracket
OPTION WITH
SOME EXISTING
INSTALLATIONS
Clevis Pin 5/16"x1-1/2" Ring Fastener
Header Bracket
Existing
Clevis Pin
Opener Carton or
Temporary
Support
Mounting
Hole
Mounting
Hole
Spacer
Idler Pulley
Header
Bracket
Garage
Door
Header Wall