Chamberlain 3850 User Manual
Garage door opener model 3850, Owner’s manual
The Chamberlain Group, Inc.
845 Larch Avenue
Elmhurst, Illinois 60126-1196
www.liftmaster.com
GARAGE DOOR OPENER
Model 3850
For Residential Use Only
Owner’s Manual
■
Please read this manual and the enclosed safety materials carefully!
■
Fasten the manual near the garage door after installation.
■
The door WILL NOT CLOSE unless the Protector System
®
is connected and properly
aligned.
■
Periodic checks of the opener are required to ensure safe operation.
■
The model number label is located under the light lens on the left side panel of your
opener.
®
C
o
m
pa
tib
le with
S
ee
Page 29 f
or
D
e
ta
il
s
Table of contents
Document Outline
- Model 3850
- TABLE OF CONTENTS
- INTRODUCTION
- ASSEMBLY
- INSTALLATION
- STEP 1 Determine the Header Bracket Location
- STEP 2 Install the Header Bracket
- STEP 3 Attach the Rail to the Header Bracket
- STEP 4 Position the Opener
- STEP 5 Hang the Opener
- STEP 6 Install the Control Console
- STEP 7 Install the Battery Backup (Optional)
- STEP 8 Install the Lights
- STEP 9 Attach the Emergency Release Rope and Handle
- STEP 10 Electrical Requirements
- STEP 11 Install The Protector System®
- STEP 12 Fasten the Door Bracket
- STEP 13 Connect Door Arm to Trolley
- ADJUSTMENT
- OPERATION
- CARE OF YOUR OPENER
- PROGRAMMING
- REPAIR PARTS
- ACCESSORIES
- NOTES
- LIFTMASTER® SERVICE IS ON CALL
- HOW TO ORDER REPAIR PARTS
- WARRANTY
- Spanish