PS Engineering PMA8000MP3 Pilot’s Guide - Manual (Page 14)

Page 14 Revision 6 PMA8000B MP3
next earlier message . Repeat until you hear the message you wanted.
Incoming new messages will stop playback, and you can then restart
the message that was playing.
Note: all messages are erased when you switch the selected transmit-
ter.
Blinking indicators
This chart shows you what the blinking indicators mean:
MP3 Player:
MP3 ON/OFF: TEL + Nav 1
Random/Sequential TEL + Nav 2
Skip ahead TEL + MKR
Pause: TEL + ADF
Laptop transfer: Turn audio panel off. Push and hold AUX
(transfer) while turning unit on, until the laptop recognizes the
audio panel as an external drive.
USB Memory Device: Connect drive to audio panel with USB
cables. Press and hold TEL + AUX until audio panel announces
“Transferring.” Release buttons, and listen to the percentage of
the files are transferred, and then “Transfer complete” is an-
nounced.
What is blinking? How often What it means
COM 1 or COM 2 Every 1 second Pilot or copilot is transmit-
COM or COM 2 Every 3 seconds Monitor mode activated
ICS mode Every 3 seconds Pilot has music in ISO
Mute and SPR but-
tons Every 1 second PA Mode active