PS Engineering PMA8000MP3 Pilot’s Guide - Manual (Page 11)

Page 11 Oct. 2010 PMA8000B MP3
Quick reference PMA8000B MP3 Operation
This pull-out section covers advanced operation of the
PMA8000B MP3.
Split Mode
The Split mode puts the pilot on COM 1, while the copilot can use
COM 2 independently. To enter the split mode, press both the COM 1
and COM 2 XMT buttons at the same time.
To exit, press the desired COM 1 or COM 2 XMT button.
When you activate the Split mode, the intercom is inhibited to avoid
confusion with multiple conversations. To reactivate the intercom,
press the Mute button.
Note: Split Mode does not turn off Nav, ADF, or Aux selected audio
to pilot. However, the copilot will only hear the selected com receiver
and unswitched inputs.
Telephone Operation
When the TEL button is active, the cellular telephone is added to the
intercom loop, and who is connected to the phone depends on the in-
tercom mode.
ISO – The pilot is alone on the telephone
All – Everybody is on the telephone.
Crew – Pilot and copilot on telephone, passengers are not.
Some cellular telephones do not provide sidetone (where you
hear yourself speak). You can have the PMA8000B MP3 pro-
vide sidetone by pressing the TEL and ADF buttons for more
than one second.
Telephone
Pilot Copilot Passengers
ISO
ALL
CRW
On phone
Not connected