Pro Boat JR XR3i - Manual (Page 3)

3
Included in this manual are in-depth instructions detailing
all the steps and procedures needed to correctly program
each of the XR3i's features. Quick Start covers the basic
programming information necessary to get you to the
track fast. Later, when you want to learn more about the
specific features of the XR3i, refer to the appropriate page(s)
in this manual for more detailed programming information.
Note: If the Auxiliary Channel 3 is required, refer
to the Auxiliary Channel 3 System Mode
(page 16) for instructions.
Servo Reversing
1. With the transmitter power switch on, press the Scroll key
to enter the Function mode.
2. Press the Scroll key until "REV.NORM" appears on
the screen. The "ST" indicates the steering servo
reversing screen.
3. Press the Increase or Decrease key to move the cursor to
the desired servo direction (Rev.Norm).
4. Press the Channel key once to access the throttle servo
reversing screen.
5. To select the direction of the throttle servo,
repeat Step 3 above.
6. Repeat Steps 2 and 3 to adjust Auxiliary Channel 3
if needed.
End-Point (Travel) Adjustment
1. From the Servo Reverse function, press the Scroll key
three times to access the End-Point (Travel) Adjustment
function (the EPA screen with "ST" will appear).
Steering Adjustment
2. Rotate the steering wheel in the desired direction (left or
right) to be adjusted.
3. Press the Increase or Decrease keys to select the desired
travel value.
Throttle Adjustment
4. Press the Channel key once. "TH" will appear on
the screen.
5. Pull the trigger for foward or push the trigger for brake
adjustment.
6. Press the Increase or Decrease keys to select the desired
travel value.
Auxiliary Channel 3 Adjustment
If a third channel is not required, proceed to Step 8.
7. Press the Channel key once. "AUX" will appear on
the screen.
8. Press the Increase or Decrease keys to select the desired
travel value.
9. Press the Scroll and Channel keys at the same time to exit
the function mode.
st
—
R E V • N O R M
SCROLL
ENTER
CHANNEL
CHANNEL
CHANNEL
SCROLL
SCROLL
INCREASE
CLEAR
DECREASE
INCREASE
CLEAR
DECREASE
INCREASE
CLEAR
DECREASE
INCREASE
CLEAR
DECREASE
Channel
ST = Steering
TH = Throttle
AUX = Auxiliary Channel 3
(optional)
Servo Direction
st
R/B
100
E P A
Adjustment Position
ST = Steering
TH = Throttle
AUX = Auxiliary Channel 3
(optional)
Current Value
L/F = Left/Forward
R/B = Right/Brake
CHANNEL
SCROLL
ENTER
CHANNEL
XR3i Quick Start Setup
4680 JR XR3i manual 7/17/02 12:14 PM Page 3