Pro Boat JR XR3i - Manual (Page 17)

17
The Grip Button C function of the XR3i allows you to select
from 3 different functions available. Use the information
below to select the correct Grip Button C assignment for your
particular installation.
"0": Off. (Default) If "AUX " is "2P ", then "2P " replaces"0" in this screen.
"Eb": ESB (Emergency Steering Button.) To cancel the "STG" regulation
for panic steering.
"LA": Lap timer.
Note: If "LA" or "Eb" is selected and "2P" is assigned
to the Auxiliary Channel 3 function, the Auxiliary
Channel 3 function is moved to Grip Dial A.
(Factory preset)
0 0 = The 0, or off function, is the default setting and does not
assign a function to Grip Button C. If the Auxiliary Channel 3
function is set to "2P" or 2-position, "2P" will appear in this
screen in place of "0" and Grip Button C will function as the
gear select button.
E EB B = The Eb or Emergency Steering Button function is
designed to override the value of Grip Dial B and provide
100% steering rate. This feature is useful if you have re-
duced the steering rate to make your vehicle easier to drive
but need full steering in an emergency situation such as a
collision.
{Figure 24-Insert new drawing of Grip Button C and Eb value
Callout GBC -
Callout Eb - Indicates
Emergency Steering Button is
activated}
L LA A = The LA or Lap-Timer function is designed to be used
when you want to enable the recording of individual lap time.
The Lap-Timer function is described on page 27.
{Figure 24-Insert new drawing of Grip Button C and LA value
Callout GBC - Indicates Grip Button C function
Callout LA - Indicates Lap Timer button is activated}
g b c
LA
Grip Button
Function
Lap-Timer
g b c
0
Grip Button C
Function
Grip Button C is
Inhibited
g b c
EB
Grip Button C
Function
Emergency
Steering Button
is Activated
g b c
LA
Grip Button C
Function
Lap-Timer Button is
Activated
Grip Button C Function Select (System Mode)
4680 JR XR3i manual 7/17/02 12:14 PM Page 17