Pro Boat JR XR3i - Manual (Page 15)

15
The Frame Rate function allows you to select one of two
transmitter frame rates available: Normal "N" - the default or
Fast "F". The Normal Frame Rate should be selected if you
are using only non-digital servos. The Fast Frame Rate may
be selected if you are using at least one digital servo.
Note: The Frame Rate function offers quicker
response times in the “F” or Fast mode. Some
types of non-JR servos are not compatible in the
“F” Fast mode and require the radio to be operated
in the “N” Normal mode.
Accessing the Frame Rate Function
1. Press the Scroll and Channel keys at the same time
and hold.
2. Turn on the transmitter power switch to enter the System
mode.
3. Press the Scroll key until "FRM" appears on the screen.
4. Press the Increase or Decrease key to select the desired
frame rate (N or F).
5. Press the Scroll key to access the Auxiliary Channel 3
function.
6. To exit the System mode, either turn the transmitter power
switch off or press the Scroll and Channel keys at the
same time.
Press and hold the
Scroll and Channel
keys at the same time
while turning the
transmitter power
switch on. Next, press
the Scroll key until
“FRM” appears.
Press the Increase or Decrease key to select the
desired frame rate. Current
Frame Rate
frm
F
SCROLL
ENTER
CHANNEL
INCREASE
CLEAR
DECREASE
Frame Rate Select (System Mode)
4680 JR XR3i manual 7/17/02 12:14 PM Page 15