Pro Boat JR XR3i - Manual (Page 25)

25
Accessing The End-Point
Adjustment Function
1. Turn on the transmitter power switch.
2. Press the Scroll key to enter Function mode.
3. Press the Scroll key until "EPA" appears in small letters
on the left side of the screen.
4. Press the Channel key to select the desired channel to
be adjusted.
Steering = ST R/B(steering right) or ST L/F (steering left)
Throttle = TH L/F (forward) or TH R/B (braking or reverse)
Auxiliary Channel 3 (optional) = AUX L/F or AUX R/B
(function 2P only)
5. Move the steering wheel, trigger or Grip Button C in the
desired direction for adjustment (left/right, forward/reverse
or brake). Press the Increase or Decrease key to achieve
the desired amount of travel. Move the wheel, trigger or
Grip Button C in the opposite direction to adjust the travel
in the opposite direction.
Note: For Auxiliary Channel 3 function, if LN is
selected, only L/F is adjustable.
6. Press the Scroll key to access the Mixing Adjustment
function.
7. To exit the Function mode, either turn off the transmitter
power switch or press the Scroll and Channel keys at the
same time.
Note: When setting the end point adjustment values
for the steering function, it is suggested that, if possible,
the maximum travel values be set to an equal value
in both directions to maintain proper steering control.
Press the Scroll key
until "EPA" appears on
the screen Press the Channel key
to select the channel to
be adjusted
Move the wheel/trigger or Grip Button C in the desired direction and press
either the Increase or Decrease keys to achieve the desired travel value
SCROLL
ENTER
CHANNEL
INCREASE
CLEAR
DECREASE
4680 JR XR3i manual 7/17/02 12:14 PM Page 25