Perfect Aire NPH12000 - Manual (Page 8)

7
OPERATING INSTRUCTIONS (CONTINUED)
OTHER FEATURES
After the unit has stopped, operation cannot be
restarted in the first 3 minutes. This is to protect
the unit. Operation will automatically start after
3 minutes.
Wait 3 minutes before resuming operation.
The louvers can be adjusted automatically .
Adjust the air flow direction automatically (Fig. 4):
- When the Power is ON, the louver opens fully.
- Press the SWING button on the panel or remote
control to initiate the auto swing feature.
- The louver will swing up and down automatically.
Please do not adjust the louver manually.
Air flow direction adjustment
Fig. 4
SLEEP operation
If the unit breaks off unexpectedly due to the power
being cut, it will restart with the previous function
setting automatically when the power is restored.
Auto-Restart
In this mode the selected temperature will increase
(cooling) or decrease (heating - units with heater only)
by 2 O F/1 O C 30 minutes after the mode is selected.The
temperature will then increase (cooling) or decrease
(heating - units with heater only) by another 2 O F/1 O C
after an additional 30 minutes. This new temperature
will be maintained for 7 hours before it returns to the
originally selected temperature. This ends the Sleep
mode and the unit will continue to operate as
originally programmed.
NOTE:
This feature is not available under FAN or DRY mode.
Swings automatically