Perfect Aire NPH12000 - Manual (Page 6)

AIR CONDITIONER FEATURES
Before you begin, thoroughly familiarize yourself with the control panel and remote control and all its
functions, then follow the symbol for the functions you desire.
The unit can be controlled by the unit control panel alone or with the remote control.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Fig. 3
NOTE: This manual does not include Remote Control Operations; see the Remote Control
Instructions packed with the unit for details.
OPERATION PANEL OF THE AIR CONDITIONER
5
MODE select button
Selects the appropriate operating mode. Each time
you press the button, a mode is selected in a
sequence that goes from AUTO, COOL, DRY, FAN
and HEAT (on models with heating function). The
mode indicator light illuminates under the different
mode settings.
FAN button
Control the fan speed. Press to select the fan speed
in three steps - LOW, MED, HI and AUTO. The fan
speed indicator light illuminates under different fan
settings except AUTO speed. When AUTO fan speed
is selected, all of the fan indicator lights go dark.
SWING button
When the operation is ON, press the
SWING button can stop the louver at
the desired angle. The louver swing up
to an angle of 6 O for each press. Keep
pressing the button more than 2 seconds
can initiate the auto swing feature.
TIMER button
Used to initiate the AUTO ON start time and AUTO
OFF stop time program, in conjuction with the
 &  buttons.
SLEEP button
Used to initiate the SLEEP operation.
POWER button
Power switch on/off.
LED Display
Shows the set temperature in " O C" or " O F" and
the Auto-timer settings. While on DRY and FAN
modes, it shows the room temperature.
(Details about error codes that may appear
on the display can be found on the next page.)
UP () and DOWN () buttons
Used to adjust (increase/decrease) temperature
settings (2°F/1°C increments) in a range of 62°F
(17°C) to 88°F (30°C) or the TIMER setting in a
range of 0-24 hrs.
NOTE: The control is capable of displaying
temperature in degrees Fahrenheit or degrees
Celsius. To convert from one to the other, press and
hold the Up and Down buttons at the same time for
3 seconds.
FOLLOW ME indicator
To activate the FOLLOW ME feature, the
indicator light flashes.
SLEEP
SWING FAN MODE
1 2 3 4
5
Remote signal receptor
9
on
off
TIMER
ON/OFF
Indicator lights display:
:Timer on light
:Timer off light
:Low fan light
:Med fan light
:High fan light
:Dry mode light
:Cool mode light
:Auto mode light
:Heat mode light*
*Units with heating function only
:Fan only mode light
On
Off
7 6 8