Philips FW570C37 - Manual (Page 21)

Auto Reverse Playback (only on tape deck21
• Press REVERSE MODE to select the different
playback modes.
^.............................recording or playback on one side of
the tape. The tape stops at the end of
one side.
.....................recording or playback on both sides of
the tape. The tape then stops.
.................. continuous playback on both sides of
the tape up to a maximum of 20 times
per side unless you press STOP ■.
Rewind/Fast Forward (only on tape deck2) •
At the stop mode
1 You can rewind or fast fonward the tape by pressing
or ►►respectively.
— "«< or »>" will be displayed depending on which
button is pressed.
— The tape will stop automatically at the end of the
rewinding or fast forwarding.
2 Press STOP ■ to stop rewind or fast forward.
During playback
• Press and hold or ►► respectively until the desired
passage is located.
— During searching, the sound is reduced to a low
volume.
— When you release or ►►. the tape continues
playing.
TAPE AUX
Notes:
- During rewinding or fast forwarding of a tape, it is
possible to select another source le.g. CD, TUNER or
AUX).
- Check and tighten slack tape with a pencil before use.
Slack tape may get jammed or may burst in the
mechanism.
- C-120 tape is extremely thin and is easily deformed or
damaged. It is not recommended for use in this
system.
- Store the tapes at room temperature and do not put
them too close to a magnetic field (for example, a
transformer, TV or loudspeaker boxes).
«
È
Selecting External Equipment_______________
If you have connected the audio out terminals of the
external equipment (TV, VCR, Laser Disc or DVD player) to
the AUX IN terminals, you can hear the sound from the
system.
• Press AUX to select the external mode.
— "RLI-““ will be displayed.
Note:
-All the sound control features (e.g. DSC, DBB, etc.) are
available for selection.