Philips FW570C37 - Manual (Page 12)

OPERATING THE SYSTEM
Switching the system ON
Important
Before you begin operating the system, complete
the preparation procedures.
Demonstration mode________________________
The system has a demonstration mode that shows the
various features offered by the system. Whenever the
system is switched on from the wail socket, the
demonstration mode wiii start automatically.
- During demonstration mode, if you press any source
lor standby-on) button, the system will switch to the
respective (or standby) mode.
- When the system is switched to standby mode, 5
seconds later, the demonstration mode will begin
again.
To cancel demonstration mode
• Press and hold STOP ■ ¡on the system only) lot 3
seconds to stop the demonstration.
— The demonstration mode will be stvitched off
permanently.
Easy Set (only in Standby or Demonstration mode)
EASY SET allows you to store all available radio stations
and RDS stations in a particular band (FM»MW*LW)
automatically (see Easy Set under TUNER section).
• Press STANDBY*ON (on the system only). CD.
TUNER, TAPE or AUX.
You can also stvitch on the system by pressing any one of
the 3 CD DIRECT PLAY buttons.
Switching the system to standby mode
• Press STANDBY»ON again.
Selecting the Source
• Press the respective source selection button. CD,
TUNER. TAPE or AUX
— The display indicates the selected source
Note:
- For an external source, make sure you have connected
the audio left and right OUT terminals of the external
equipment (TV VCR, Laser Disc or DVD player) to the
AUX IN terminals.