beautypg.com

Receiving rds radio station fp, Rds time, Setting the time with rds clock – Philips FW570C37 User Manual

Page 19: 1 press clock'timer, To cancel news function, Tuner

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

TUNER

Receiving RDS radio station

fp,

___________

RDS (Radio Data System) is a broadcasting service that

allows FM stations to send additional information along

with the regular FM radio signal. This additional

information can contain:

• STATION NAME: The station name is displayed.

• FREQUENCY: The frequency of the station is

displayed.

• PROGRAM TYPE: The following program types exist

and can be received by your tuner: News, Affairs, Info,

Sport, Educate, Drama, Culture, Science, Varied, Pop

M, Rock M, M.O.R. (middle of the road music). Light

M, Classics, Other M, No type.

• RADIO TEXT (RT): text messages appear in the

display.

When you have tuned to a RDS station, the RDS logo (g)

and the station name will appear on the display:

• The display normally shows the radio station name if

available.

By repeatedly pressing RDS button you can change

the type of display information:

-* * The display shows in turn:

STHTIOfJ NRfC-rRCDUEfJCy-*

PRDGRRfl TyPC-RRMO TG;;!-

5TRTIDN NRHG...

Note:

- When you press the RDS button and the display

shows "NO RB5°, it indicates that either the tuned

station is not transmitting RDS signal or it is a non

RDS station.

RDS Time

Some RDS station may be transmitting a real clock time

at an interval of every minute.

Setting the time with RDS clock

1 Press CLOCK'TIMER.

or current time appears on the display.

2 Press CLOCK»TIMER once more to enter clock setting

mode.

"GG 'OO" or current time starts flashing.

3 Press RDS.

The message "5ERPCH f?B5 TING" will be

displayed.

— If the station does not transmit RDS clock, "NQ

PUS TING" will be displayed.

-* When the RDS clock is read, "RBS TIflG° will be

displayed. The current clock time is displayed for 2

seconds and will be stored automatically.

News

(only avaiiable in Radio Station with RDS)

You can activate NEWS function in Standby or any source

mode except Tuner mode. Once the News PTY (program

type) is detected in a RDS station, it will switch to TUNER

mode automatically.

To start NEWS function

1 Press NEWS.

• The NEWS flag and "NGNS BN" will be displayed.

• It will search for the first available RDS station in the

presets and wait for the News PTY (program type) to

be available. During News PTY search;

-* If NEWS activate from Standby or Demo mode, tbe

display will show "iJRI TING GOP NGNS”.

— If NEWS is activated from CD, Tape or Aux mode,

the current source activity will be remain

uninterrupted.

-* If no RDS station is found after the search, the

News function will be switched off. The display

will show'Nu PS5 NGN5° and NEWS flag will

disappear from the display.

• When News transmission is detected, the system will

switch to Tuner mode.

— The NEWS flag starts flashing.

• After News has ended, the last selected source mode

will be resumed.

The NEWS flag will disappear from the display.

To cancel NEWS function

• Press NEWS again.

— The NEWS flag disappears and 'NGifS OGF“ will

be displayed.

-* The last selected source mode will be resumed.

Notes:

- During NEWS bulletin" you can press any available

source button to cancel NEWS function and execute

the relevant source mode.

- The NEWS works only once for each activation.

- If NEWS is activated from Standby or Demostration

mode, it switches to Tuner mode and the sound will be

muted until News is available.

19