Loading a tape, Tape playback, Tape – Philips FW570C37 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TAPE

Loading a tape

Press OPEN.

The tape deck door opens.

Load the tape with the open

side downward and the full

spool to the left.

Close the tape deck door.

Tape Playback

1 Press TAPE to select TAPE mode.

— ‘TP,PC Tor TAPE

?° will be displayed.

• Press TAPE again to select either tape deck 1 or tape

deck 2.

2 Load the tape into the desired tape deck.

3 Press PLAY ► to start playback.

3a (For Tape Deck 2 only)

Press SIDE A*B to switch playback beKveen sides A

and B.

— The ◄ or ► (back or front) flag appears on the

display, depending on the side selected.

3b (For Tape Deck 2 only)

Press REVERSE MODE to select the different type of

playback mode (see auto reverse playback)

4 Press STOP ■ to end playback.

Notes:
- To change side before playback begins, use the SIDE

button on the remote control

- When the tape has stopped playing, the system will

switch to the standby mode automatically after 15

minutes if no button is pressed.