Philips FW570C37 - Manual (Page 18)

TUNER
Storing Preset Radio Stations_______________
You can store up to 40 radio stations in the memory.
When a preset radio station is selected, the preset
number appears next to the frequency on the display.
Automatic programming
1 Press TUNER.
2 Press TUNER (BAND) again to select the desired
waveband; FM, MW orLW.
3 Press PROGRAM for more than one second.
— PROGRAM flag starts flashing and “RLITD“ will be
displayed.
-* Every available radio station will be stored
automatically. The frequency and preset number
will be displayed briefly.
-* The system will stop searching when all the
available radio stations are stored or when the
memory for 40 preset radio stations is used.
— The system will remain tuned to the last stored
preset radio station.
• Repeat the above procedure to store other preset
stations for the other waveband. Remember to select
the next available preset number before proceeding. If
not, some of the preset radio stations may be erased.
Notes:
- You can cancel the automatic programming by
pressing PROGRAM or STOP ■.
- if you want to reserve a section of preset numbers, for
example preset numbers 1 to 9, select preset 10
before starting automatic programming: now only the
preset numbers 10 to 40 will be programmed.
Manual programming
1 Press TUNER.
2 Press TUNER (BAND) to select the desired
waveband: FM, MW or LW.
3 Press PROGRAM for less than one second.
— PROGRAM flag, the frequency and preset station
number start flashing.
— The next available preset number will be displayed
for selection.
4 Press TUNING « or ►► to tune to the desired
frequency.
• When all 40 presets are stored, no preset number is
shown.
— The message 'PRDGRRtI FULL" will be
displayed.
• If you wish to store the radio station to another preset
number, press PRESET T or A to select the desired
preset number.
5 Press PROGRAM again.
— PROGRAM flag will stop flashing, and the radio
station will be stored.
• Repeat the above procedure to store other preset radio
stations.
Notes:
- You can cancel the manual programming by pressing
sTOPm.
- During programming, If no button is pressed within 20
seconds, the system will exit program mode
automatically.
Tuning to Preset Radio Stations__________
• Press PRESET T or A to select the desired preset
number.
— The preset number, frequency and waveband
appear on the display.
18