Philips RD0945T - Manual (Page 9)

Automatic Channel Programming
This function allows you to automatically program locally
available channels into the TV scanning system.
D If not in the program mode, press the Display button
until PRG CH MANUAL/AUTO displays on the screen.
Press + button.
B The channel number will continue to change until the
next active channel is found.
B The color of the channel number on the screen auto­
matically changes from red to green when the channel
is programmed (added into the TV scan system).
B The unit sequences through all the channels until the
last active channel is found.
B When auto channel programming is completed, the
lowest programmed channel reappears on the screen.
B Press the Exit button to clear the screen.
To Cancel Programmed Channels
D Press the Display button until MANUAI7AUT0 displays
on the screen. Press — button to select MANUAL.
B Press Channel ^ (Up)/^ (Down) button (or use num­
ber buttons on the Remote Control) to select the chan­
nel you wish to cancel (or drop from TV scan system).
B Press the — button. The channel color changes from
green to red.
El Repeat steps (2) and (3) to cancel other channels.
B Press the Exit button to clear the screen.
NOTE: If the AC cord is unplugged or a power failure
occurs for an extended period (more than 30 min.), it may
be necessary to re-program the desired channels.
Manual Channel Programming
This function allows you to program locally available
channels manually into the TV scanning system.
O If not in the program mode, press the Display button
until PRG CH MANUAL/AUTO displays on the screen.
Press — button to select MANUAL. The red color of a
channel number will indicate that this channel has not
been programmed (added into the TV scan system).
B Press channel A (Up)/^ (Down) button (or numeric
channel buttons on the Remote Control) to select a de­
sired channel.
B Press the -1- button. The channel number on display
changes color from red to green, indicating the channel
is programmed.
El Repeat steps (2) and (3) to set any other channels.
B Press the Exit button to clear the screen.
9