Philips RD0945T - Manual (Page 6)

Remote Control Unit
O POWER
Press the Power button on the Remote Control once to
turn the set ON. Press it again to turn the set OFF.
O NUMERIC CHANNEL BUTTONS
Direct channel selection. For channels 1 through 9, press
the "0" button first and then your desired channel number
(For example: for channel 4 press 0-4, not 4). For channels
10 through 99, press the two digits in order (for channel
26 press 2-6). Be sure to press the second digit within 3
seconds after the first digit or the set will select the chan­
nel only for the first number pressed. The "0" button also
selects AM or PM when setting the clock or timer.
0 TIMER
Use this button to set clock, sleep time, every day timer
and one time timer.
O DISPLAY
Press this button to choose between the different on­
screen display modes. The on-screen display remains for
12 seconds after pressing this button.
0 VOLUME-UP, DOWN
Press either the Volume (Up) or (Down) button to increase
or decrease the sound level as desired. (The volume level
is displayed on the screen when the level is changed.)
This button allows you to go back to the previous viewed
channel. For example; If you select channel 11 and then
switch to channel 2, using the channel number buttons,
just press the A/CH button and the TV set will automati­
cally be switched to the previous channel. Press the A/CH
button again to return to channel 2.
O STATUS/EXIT
Press the Status/Exit button to display the Channel being
viewed and clock. Press again to turn off display.
NOTE: This feature does not work in the program mode.
© SELECT BUTTON (+, -)
These buttons are used for adjusting, selecting or cancell­
ing functions.
© CHANNEL-UP, DOWN
To change the channel, press either the Channel Up or
Down button. If you press and hold either button, the
channels will continue to change. The number of the chan­
nel being viewed will be displayed ort the screen.
® MUTE
Press the Mute button to turn off the sound portion of the
program. (When the Mute button is pressed, "MUTE" dis­
play will appear in red.) This is convenient when answer­
ing a telephone. Press the Mute button again or press
Volume Up or Down to restore sound.