Philips 27PT91S - Manual (Page 44)

S ound - U siní ; rni: Ai dio /V' idi : o I nput J acks
At i)io/\ 11)1
( ) i M ' t I
s
7 "he TV’s audio/video input
jacks are for direct picture
and sound connections between
the TV and a VCR (or similar
device) that has audio/video out­
put jacks.
iBEOlWf'l
Connect the VIDEO (yellow)
cable to the VIDEO AV1 jack on
the back of the TV. Then con­
nect the AUDIO (red and
white) cables to the AUDIO (left
and right) AVI jacks on the rear
of the W.
Connect the VIDEO (yellow)
cable to the VIDEO OUT jack
on the back of the VCR. Then
connect the AUDIO (red and
white) cables to the AUDIO (left
and right) OUT jacks on the rear
of the VCR.
'Dim the VCR and the TV
I ON.
Press the M. MEDIA button
on the remote control until the
AVI source is selected. After
AVI appears, insert a prerecord­
ed tape into ftie VCR and press
the PLAY button to view me tape
on the television. If AVI did not
appear, perform steps 5-9.
NOTE: the actions described in
steps 5-9 are not illustrated on
this page.
If AVI did not appear
onscreen as one of the choices
available to you by pressing the
M. MEDIA button, press the
M Link button on the remote
control to display the M-Link"'
onscreen menu..
<|> Press the CURSOR RING
Y m C H T or CURSOR RING
I LEFT button to highlight CVI.
<£> Press the CURSOR RING
I UP to toggle from CVI to AVI.
Press the STATUS/EXIT
I
button to remove the M-Link"
menu from the screen.
Press the M. MEDIA button
to tune the AV 1 source. You are
now ready to view the VCR tape
on the TV.
0
NOTE: Repeatedly pressing the M. MEDIA button on
the remote control will toggle the picture source from
dte current channel (Tuner A or B), the last viewed
channel, then AVI (or CVI) connection, then the AV2
connection, and then the AV3 connection.
^ cT o
0 G H 9 Ü 0
5/T\0
© ® ®
® ® ®
® ® ®
© ® ©
VCR
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
If you ate using a
nonstereo device, use
only the Audio R jack.
SIDE VIDEO
JACK PANEL INPUTS
NOTE: For mote ctmvenient direct playback con­
nections, you can use your TV’s side video input
panel, located on the right and angled toward the
fiont for easy access. The audio/video jacks in this
panel allow for quick connections that are especially
handy tor playing back camcotder (composite video
or S-VHS) tape recordings. Press the temóte control'i
M. MEDIA button to select the AV3 mode. Then use
the side jack panel inputs for playback on the TV.
38