Philips 27PT91S - Manual (Page 43)

S ound - U sing the S urround S ound E xternal S peaker C onnections
T)y adding optional external
£j speakers to the TV’s sound sys­
tem, you can create the feeling of
reflected sound that surrounds you
at a movie theater or concert hall.
¿BEGIW)
Connect both external speak­
ers to the speaker wire terminals
on the TV.
Recommended speakers: 8 ohm,
15 watt minimum. Be sure the (+)
and (-) speaker wires are connect­
ed to the correct R(ight) and L(eft)
speaker terminals on the TV.
Place the speakers so that the
viewing area is between the TV
and the rear surround speakers.
(See overhead view drawing.)
Ttirn the TV ON. The rear
Surround Sound speakers will not
be heard at the same volinne level
as the front TV speakers. Adjust
the sound level with the Volume
buttons.
After setup, whenever a stereo sig­
nal is received, the audio will be
heard in Surround Sound.
S m a r t H i l p
Remember, Surround
Sound will not work with
only one speaker connected, nor
with a monaural audio source sup­
plied, unless the Incredible
Surround feature is turned ON
(see page 32).
BACK OF TV
—
— 1
I M i f s .
REAR SURROUND SOUND SPEAKERS
NOTE: The rear speakers are intended to give
a background noise effect that requires a lower
volume level than the TV’s front speakers. The
volume level being heard from these speakers
will be lower than the volume level being
heard at the front TV speakers
REAR SPEAKER
REAR SPEAKER
PRIMARY VIEWING AREA
37