Philips MX6050D-17 - Manual (Page 40)

DVD Setup Menu Options
Using the menu bar
You can continue a number of operations
directly via the multiple menu bars on the
TV screen without interrupting the disc
playback. The exception is when you
enter ^ (SETUP MENU), after which the
playback will pause.
In disc mode, press SYSTEM MENU.
The menu bar will appear across the
top of the TV screen.
W Use ► A T keys on the remote to
navigate in the menu.
Press ► to move through the menu bar.
Press T to enter the selection. If there
are multiple choices available, press ▼
repeatedly to select.
© Press SYSTEM MENU again to remove
the menu.
IMPORTANT!
- Some operations may be different
or restricted, depending on the disc
format. Refer to the jacket or case
of the disc you are playing.
- Changing the Subtitle Language
and Audio Language from the menu
bar will only apply to the current
disc, it will not change the default
preset.
SUBTITLE
Select a subtitle language available on the DVD.
AUDIO
DVD : Select an audio soundtrack language available
on the DVD.
VCD : Select audio channels ; LEFT VOCAL,
RIGHT VOCAL, MONO LEFT,
MONO RIGHT or STEREO.
SLOW MOTION
Select a slow playback speed. The volume will be
muted. To resume normal playback, press ►
II.
DVD: SFx1/2,SFx1/4,SFx1/8.
SR x1/2, SR x1/4, SR x1/8, OFF.
VCD; SFx1/1.SFx1/2,SFx1/3,OFF.
(SF - Slow Forward, SR- Slow Rerverse)
V ast reverse ( fr >
DVD / MP3 : FR x2, FR x4, FR x6. FR x8. OFF.
VCD / CD ; FR x1. FR x2. FR x3, FR x4, OFF.
FAST FORWARD (FF)
DVD / MP3 : FF x2, FF x4, FF x6, FF x8. OFF.
VCD / CD ; FF x1. FF x2, FF x3. FF x4. OFF.
Select a search speed (FR ■ backward, FF - forward).
The volume will be muted. To resume normal
playback, press ^11.
STATUS
Allows viewing of the current status of the disc.
The information will vary depending on the disc
format.
I Available on DVD only
I TITLE SEARCH (TITLE XXtYY")
I Select a Title for playback to begin.
CHAPTER SEARCH (CHAPTER XXrYY)
I Select a Chapter for playback to begin.
I "XX" - current title/chapter number.
I "YY" - total number of title/chapter.
I Use the numeric keypad (0‘9) to change the
I "XX" number, then press OK.
TIME SEARCH (TIME
Use the numeric keypad (0-9) to enter the
time (hours, minutes and seconds) at which you want
playback to begin (for DVD and VCD with PBC-OFF
only)
ZOOM
Select an enlarge picture ratio ; x1.5, x2 or x4.
Use ^ ►
A T keys to move within the enlarged
picture on the TV. To resume normal playback,
select 'ZOOM OFF’ from the menu.
ANGLE (for DVD only)
Select to view the same scene from different angles
if the DVD is recorded with multiple angles.
STEP FORWARD
Select to advance the still picture one frame
forward. To resume normal playback, press ►
II.
PBC ON/OFF (for VCD 2.0 with PBC feature)
Select between PBC On and Off.
'PBC OFF' - the playback will start automatically.
'PBC ON' - the disc menu (if available) will appear
on the TV. Use the numeric keypad (0-9) to
enter your choice.
PROGRAM
Stop playback, then select this to enter the program
menu (see page 25 "Using the menu bar to program".)
26