Step 1: set up the speakers, Step 2: placing the speakers and subwoofer, Caution – Philips MX6050D-17 User Manual
Page 24: Connections
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections
Step 1: Set up the speakers
bracket
Step 2: Placing the speakers
and subwoofer
Front Speaker
(U(t)
Centei
speaker
and DVD system
Front Speaker
(Risht)
Kear Speaker
Subwoofer
Rear Speaker
(Right)
You can choose to hang the speakers on
the wall. Attach the supplied bracket
firmly to the rear of speakers using the
supplied screws. Then mount a screw
(not supplied) on the wall where the
speaker is to be hung and hook the
speaker securely onto the mounted
screw.
CAUTION!
You should get a qualified person to
attach the brackets to the wall. DO
NOT do it by yourself to avoid
unexpected damage to the
equipment or injury to personnel.
Helpful Hints:
- The rear speakers are labelled as REAR L
(left) or REAR R (right).
- The front speakers are labelled as
FRONT L (left) or FRONT R (right).
For best possible surround sound, all the
speakers (except subwoofer) should be
placed at the same distance from the
listening position.
® Place the front left and right speakers at
equal distances from the TV and at an
angle of approximately 45 degrees from
the listening position.
O Place the center speaker above the TV or
the DVD system so that the center
channel’s sound is localized.
O Place the rear speakers at normal
listening ear level facing each other or
hang on the wall.
O Place the subwoofer on the floor near
the TV.
10