SoundMax SM-CDM1038 - Manual (Page 17)

16
Radio operations
BAND selection
Press repeatedly BAND button to select your desired radio band in radio mode: FM1, FM2, FM3, AM1
(MW1), AM2 (MW2). Each band can store 6 preset stations, for a total of 30 preset memory stations.
Tuning
Rotate repeatedly PREV/NEXT knob to manually adjust the radio frequency. Rotate and hold PREV/NEXT
knob, the radio will seek to the next up or down strong and clear frequency station automatically. Repeat
this action to seek for other desired stations. To stop automatic search, rotate NEXT/PREV knob.
Automatic store/Scan
Automatic store: Press and hold F/PS button, the receiver will automatically scan and save stations for
the current band.
Scan: Press F/PS button once to scan the saved stations in each band.
Programming stations
There are six numbered preset buttons, under which you can store and recall stations for each band.
Select the needed station, then press and hold a preset button. The station will be saved in the memory
under the corresponding number. To recall a stored station, press the corresponding preset button.