SoundMax SM-CDM1038 User Manual

Page 16

Select SEEK 1 or SEEK 2.
Seek 1: In Radio mode rotate and hold PREV/NEXT knob. The radio will seek the next strong and clear
frequency station. Repeat to seek more stations in your listening area with a strong signal.
Seek 2: In Radio mode rotate and hold PREV/NEXT buttons for station search. The search will not cease
until you release the knob.
VOL LAST/ADJUST
In this mode the unit will be turned on with the same volume level at which the unit was shut down last
time. You can rotate VOL knob to switch to “VOL ADJ”. Press SEL button to confirm, then “A-VOL” will be
displayed. At this time, rotate VOL knob to set the volume level you need. This will be the preset sound
level for unit. Then every time the unit will be turned on with this volume level. Leave the unit idle for the
new setting to take effect.

Loudness
Press LOUD; LOUD ON will be displayed meaning that bass output emphasize function is activated. To
deactivate the function press the button again.

AUX in jack
AUX-in jack is intended for connecting an external audio or video equipment to amplify the sound. If
connection is made correctly, the audio signal from the external source will be translated through the
acoustics of the head unit. This enables to adjust the volume and quality of the sounding. For example,
you can connect an MP3-player to listen to tracks using the car acoustic system.