Canon IMAGE FORMULA DR-6010C - Manual (Page 53)

Chapter 3 Basic Operation
3-23
3-6 Using Patchcode Sheets
The DR-6010C ISIS driver and CapturePerfect 3.0 both support the automatic file separation
function with patchcode sheets.
Patchcode patterns are printed on patchcode sheets, which are used to automatically separate files.
When the scanner recognizes a patchcode sheet during scanning, the files are automatically
separated at the patchcode sheet or at the image data of the next document.
Note
• The TWAIN driver does not support batch separation.
• Patchcode sheets can be used only when the ISIS compatible application supports
separating files by patchcode patterns.
• Patchcode sheets cannot be used when the MultiStream function (See “MultiStream
Function,” on p. 3-34.) is being used.
About Patchcode Sheets
Patchcode sheets are data in a portable document format (PDF.) There are four types; [PATCH II
(A4)], [PATCH II (LTR)], [PATCH T (A4)], [PATCH T (LTR)] according to the paper size and pattern.
Click on the Windows start button, open [Programs] Æ [Canon DR-6010C] Æ [PATCH X (XX)]. Print
the patchcode sheet to use it for scanning.
Note
To open patchcode sheets you need CapturePerfect 3.0, which is provided with the scanner,
or an application, which supports PDF format files.
IMPORTANT
Patchcode sheets must be printed in their original size. The scanner may not recognize them
as patchcode sheets if they are enlarged or reduced.