Canon IMAGE FORMULA DR-6010C - Manual (Page 17)

Chapter 2 Setup
2-2
2-2 Installation Requirements
To use the DR-6010C scanner, your computer must satisfy the following system requirements.
• One of the following operating systems:
- Microsoft Windows 2000 Professional SP4 or later
- Microsoft Windows XP Professional SP3 or later
- Microsoft Windows XP Home Edition SP3 or later
- Microsoft Windows XP Professional x64 Edition SP2 or later
- Microsoft Windows Vista Home basic, Home Premium, Business, Ultimate or Enterprise
SP1 or later
Note
Microsoft Windows Vista has 32- and 64-bit versions.
• A computer that meets the following specifications:
- CPU: Celeron M (1.4 GHz or faster)
- Memory: 512 MB or more
- Hard disk: 1 GB or more available space
- Interface: USB port present as standard equipment on the computer (Hi-Speed USB 2.0)
or SCSI expansion card
- Monitor: Resolution of 1024 × 768 (XGA) or better recommended.
• When using a SCSI expansion card, select one of the following recommended models.
- AVA-2915LP (Adaptec)
- AVA-2930LP (Adaptec)
- REX-CB31 (Ratoc Systems)
• An ISIS-compatible application or a TWAIN-compatible application that is compatible with the
above operating systems.
IMPORTANT
• If you do not know the requirements for your computer system, contact the store where you
purchased the computer or the manufacturer of the computer for more information.
• Do not connect both a USB interface and a SCSI card at the same time.
• Be aware of the following information when using the USB interface that was provided as
standard with your computer.
- The USB interface should be a Hi-Speed USB 2.0 interface.
- Scanning speeds are lower if your computer’s standard USB interface is USB Full-Speed
(equal to USB 1.1.) In this case, using a SCSI expansion card is recommended.
- Use the latest USB 2.0 driver made available by Microsoft. For details, consult your local
authorized Canon dealer.
- Normal operation is not guaranteed with all USB interfaces, even if present as standard
equipment on the computer. For details, consult your local authorized Canon dealer.
- The USB cable you are using should be the one originally included with the scanner or a
Hi-Speed USB 2.0 compatible cable.
• Be aware of the following information when using a SCSI card.
- Make sure to follow the procedure in the manual for the SCSI card and the computer that
you are using when installing a SCSI card in your computer.
- The overall length of the SCSI cable you can use is determined by the SCSI standards.
Refer to the manual for the SCSI card you are using for more information.