Philips MX5471 - Manual (Page 3)

TV AND R
emote
C
ontrol
O
peration
T elevision
III R emote
R vh i : kv I ssiait . vi ion
o load the supplied bat­
teries into the remote: T
1. Remove the battery
compartment lid on the
back of the remote.
2. Place the batteries (3-
AA) in the remote. Be
sure the (+) and (-) ends
of the batteries line up
correctly (inside of case is
marked.)
Reattach the battery lid.
T\ -CBL-VCR "S\.sri;M"
lit ITONS
The remote's TV-CBL-VCR
System buttons control how
buttons on the remote are
used.
For example:
With the "TV" system but­
ton pressed:
the Menu, (M)AT, and
(+,-) buttons are used to
select and adjust on­
screen TV features.
With the "CBL" system but­
ton pressed:
the Power, Channel
Number, and Channel
UpA /DownT buttons on
the remote work with
Cable TV Converters.
With the "VCR" system but­
ton pressed:
the Menu, (M)AT, and
(+,-) buttons on the remote
work Stop, Play, Pause,
and other VCR features.
Note: For more details on
how the TV remote works
with VCRs and Cable
Converters, see the other
owner's manual supplied with
your TV.
T begin T
r<3>,
Press the POWER
button to turn the TV ON.
Press the VOLUME UP
(A) or DOWN (T) button to
adjust the sound level.
Press the CHANNEL UP
(A) or DOWN (▼) button to
select TV channels.
---------------------------------------- Qg
POWER VOL VOL CH CH • STATUS MENU ADV ADV VCR
+ A T - A A T
iBEQiN)
“"^i^PresstheTV
"System" button on the
remote to be sure the remote
sends its commands to the TV.
Point the remote control
toward the remote sensor win­
dow on the TV when operating
the TV with the remote.
--------------------------- ^
VCR Buttons
For use of VCR buttons see the "Using the
Remote With a VCR" in your other owner's
manual.
Menu Buttons
Press the M button to show on-screen con­
trols. Press M A or v buttons to move up (or
down), the M or ► to move left (or right)
through the list of controls.
(-) and f-i-) Buttons
Press to adjust the selected on-screen (Menu)
feature control.
Volume Buttons
Press to adjust the TV sound level.
2 lYiner A/B Button
Press to select either the ANT(enna) A or
ANT B input (on the rear of the TV) to be
displayed as the TV’s main screen signal.
TVA^CR Button
For use with accessory VCRs. Also can be
used to quickly select channels 3/4, ANT
A/B inputs, AUX1/2/3 modes as well as the
last viewed channel on the TV.
Sleep/Enter Button
Press to set the TV to automatically turn
itself OFF. Also can be used as an Enter but­
ton when sending channel commands to
remote controlled cable converters or VCRs.
Smart Button
Press to select from a list of Smart controls.
Smart Picture for factory preset picture con­
trol levels (set for different types of viewing
sources and programs.) Smart Sound to con­
trol TV sound levels during program changes
or commercial breaks. Smart Surf to quickly
select up to 10 channels (separate from the
TV’s normal channel scan memory). See the
"Smart Features" section in your other
owner's manual for details.
Power Button
Press to turn the TV (or select VCR/ Cable
Converter) ON and OFF.
_______________________________________
IIGHTI^OTE: Press the glow in the dark STATUSAIGHT
1 1 1 1 1 >\ button to backlight other selected feature buttons
(Menu, Volume AT, Channel AT, etc.) on the remote control.
The five second backlight on these select buttons will make
them easier to read In the dark. Repress the STATUS/LIGHT
button to relight the buttons as needed.
Press to see the current channel number on
the TV screen. Also press to clear the TV
screen after control adjustments. (See the
“LIGHT’ button note for glow in the dark
remote button functions.)
Surf Button
Press to select previously viewed channels.
With the TV’s “Smart Surf’ control ON
«you can place up to 10 channels in memo­
ry. Then by pressing the SURF button you
can quickly view the select channels.
See the "Smart Surf section (in your other
owner's manual) to see how to select a
series of channels using the Surf button.
Channel Scan Button
Press to scan up or down through any pro­
grammed channel numbers. •
TV Guide Plus + Bi^ttons
Press to operate the on-screen TV Guide
program system. Refer to your separate TV
Guide Plus-h Setup and Users manual for
operating details.
PIP Buttons
Press to operate Picture-In-Picture features.
See "PIP" section in your other owner's
manual for details.
Mute Button
Press to turn the sound OFF on the TV.
Press again to return the sound to its previ­
ous level.
Number Buttons
Press the number buttons to select TV
channels. Press J
wq number buttons to
select single digit channels. For example:
press "0" then "6" for channel 6.
TV-VCR-CBI. Sv.stem
Buttons
Press to send remote signals to either the
S mart H elp
Remember, You
’'^__can press any button on
the front of the TV to
turn the TV ON.
The tuned channel number will
always briefly appear when the
TV is first turned ON (and with
channel changes.)
You can also press the STATUS
button (on the remote) to see
what channel the TV is ON.
3 - EL6246 E001