Shooting with servo af, P. 85), Choose [servo af – Canon 200 IS User Manual
Page 85: Focus
85
While the shutter button is pressed halfway, the focus and exposure will
continue to adjust, allowing you to take pictures of moving subjects without
missing a shot.
Choose [Servo AF].
●
Press the
n button and choose
[Servo AF] on the
4 tab, and use the qr
buttons to choose [On].
Focus.
●
Focus and exposure will be maintained
where the blue AF frame appears while
you press the shutter button halfway.
●
If a face is not detected when AF Frame is
set to [Face AiAF]
, the AF frame
will be set to [Fixed frame].
Shooting with Servo AF
•
The camera may not be able to focus and set the exposure in some
conditions.
•
If a correct exposure cannot be obtained, the shutter speed and aperture
value are shown in orange. Take your finger off the shutter button, then
press it again halfway.
•
You cannot shoot with the AF lock in this mode.
•
While in Servo AF mode, [AF-Point Zoom] in the
4 tab cannot be set
to [On].
•
Not available in Self-Timer
,
.