Canon i 250 - Manual (Page 30)

Printing Maintenance
28
Print Head Cleaning
Clean the print head if you suspect that the nozzles might be clogged. Cleaning the print
head consumes ink, so perform print head cleaning only when necessary.
1
Ensure that the printer is on.
2
Open the Printer Properties dialog box.
See "Opening the Printer Properties Dialog Box Directly from the Start Menu Opening the Printer Properties Dialog Box Directly from the Start Menu Opening the Printer Properties Dialog Box Directly from the Start Menu Opening the Printer Properties Dialog Box Directly from the Start Menu" """ on
page 11.
3
Start Print Head Cleaning.
(3) When the confirmation message is displayed, click OK OK OK OK.
Important Do not perform any other operations until the print head
cleaning finishes. This takes about 60 seconds.
Note z After print head cleaning finishes, print the nozzle check pattern to
verify that the print head nozzles are clean.
See "Printing the Nozzle Check Pattern Printing the Nozzle Check Pattern Printing the Nozzle Check Pattern Printing the Nozzle Check Pattern" """ on page 26.
z If the problem persists, perform print head deep cleaning.
See "Print Head Deep Cleaning Print Head Deep Cleaning Print Head Deep Cleaning Print Head Deep Cleaning" """ on page 30.
(1) Click the
Maintenance
Maintenance Maintenance Maintenance tab.
(2) Click Cleaning Cleaning Cleaning Cleaning.