Appendix c: changing audio card settings, Enabling/disabling creative 3d stereo enhancement, In windows 95 – CREATIVE AWE64 User Manual
Page 36: Click the start button, point to settings, and, In the control panel window, double-click the s, In the system properties sheet, click the devic, Changing audio card settings
Changing Audio Card Settings C-1
C
Changing Audio Card Settings
This chapter is organized as follows:
❑ Enabling/Disabling Creative 3D Stereo Enhancement Effect
❑ Enabling/Disabling Full Duplex Operation
❑ Enabling/Disabling MPU-401 MIDI Emulation
❑ Enabling/Disabling Joystick Interface
Enabling/Disabling Creative 3D Stereo
Enhancement Effect
The Creative 3D Stereo Enhancement effect allows you to eliminate
speaker crosstalk which occurs when two speakers are placed close
together. With this effect enabled, mono and stereo sounds produced
by your speakers will have increased depth and breadth.
This effect can be enabled or disabled in Windows 95 and MS-DOS.
If your pair of speakers or another device already has a built-in
3D sound technology, do not activate this feature in both
devices. The 3D Stereo Enhancement effect, when activated
with another 3D sound technology, may distort the audio
output.
In Windows 95
To enable or disable the effect in Windows 95:
1. Click the Start button, point to Settings, and then click Control
Panel.
2. In the Control Panel window, double-click the System icon.
3. In the System Properties sheet, click the Device Manager tab.