CREATIVE AWE64 - Manual (Page 15)

1-6 Setting Up Your Audio Card
To test your DRAM upgrade:
1. Make sure you have installed the audio card’s software. (The
installation of the software will be covered in the next two
chapters.)
2. Start the AWE Control Panel and download SoundFont banks.
From the memory status bar, you should be able to see the
changes in the available memory onboard.
3. Play your SoundFont banks to make sure your DRAM Upgrade
daughterboard is working properly.
Refer to the online User’s Guide for detailed information on how to
use the AWE Control Panel.