Compaq iPAQ - Manual (Page 29)

Adding System Memory and Upgrading the Internal Hard Drive
3-6 Quick Setup & User’s Guide
Adding or Removing Memory Modules
5. To install a memory module, press out on both latches of the DIMM
socket at the same time 1. Match the notch on the module with the tab on
the memory socket 2. Firmly push the module straight into the socket,
ensuring that the module is fully inserted and properly seated 3. The
latches will close automatically when the module is seated correctly,
securing the module in the slot.
QuickSetup_UsersGuide.book Page 6 Wednesday, May 30, 2001 9:36 AM