Clarity C600 - Manual (Page 27)

Troubleshooting
E
N
G
L
I
S
H
27
Phone Will Not Hold Charge:
¥ Make sure the charging contacts on
the handset and base are free of dust
and dirt. Clean the contacts with a
soft cloth.
¥ Make sure CHARGE LED on the base
is lit when handset is in the cradle.
¥ If necessary, replace the handset
battery. (See Handset Battery Charging)
Difficulty in Placing or Receiving Calls:
¥ Move closer to the base and
try again.
¥ If moving closer does not work, you
may have lost the security code.
¥ Reset code by placing the handset
back on the base for 5-10 seconds.
(See Security Code Section)
¥ Make sure you have selected the
correct dialing mode, tone or pulse.
¥ Make sure the AC Adapter is not
plugged into a wall outlet with other
appliances. Disconnect for 5-10
seconds then reconnect. Place the
handset back on the base and
reinsert the AC Adapter.
¥ Make sure the handset battery is
fully charged.