Feature set-up – Clarity C600 User Manual
Page 12
Feature Set-up
Setting Contrast
There are 3 contrast levels and the default is set
to level 2.
1.
After setting the language, press UP(
▲
)
key to begin setting contrast.
2. The LCD display will show LCD
CONTRAST and 1 2 3.
3. Press the 1, 2 or 3 key to change the
level.The current selected level will be
highlighted.
4. Press the UP(
▲
) or DOWN (
▼
) button
to go to the next menu.
Setting AREA CODE 1
1.
After setting Contrast, press UP (
▲
)
button to set Area Code 1.
2.
The LCD display will show “AREA CODE
1 and XYZ with X digit blinking.
3. Enter the area code number using the
numeric keys on the handset.
4. Press the UP (
▲
) or DOWN (
▼
) button to
go to the next menu.
Setting AREA CODE 2
1.
After setting Area Code 1, press UP (
▲
)
button to set Area Code 2.
2.
The LCD display will show AREA CODE
2 and XYZ with X digit blinking.
3. Enter the area code number using the
numeric keys on the handset.
4. Press the UP (
▲
) or DOWN (
▼
) button
to go to the next menu.
12
CALLER ID DISPLAY
Set-up Mode
C600 handset goes into setup mode automatic
when battery is connected.
Or press and hold MODE button for 3 seconds
to enter setup mode. If there is no input within
30 seconds, the language will be set to the last
selected one and go back to standby mode.
Setting Language
1.
After entering setup mode, the LCD
display will show SEL LANGUAGE
and then 1.ENG 2.SPA
alternately with a tick mark against
the selected language.
2. Press 1, 2 OR 3 button once to change
the language.The tick mark will move
against the new selection.
3. Press UP (
▲
) to go to the next menu.
Caller ID Screen