Clarity C600 - Manual (Page 21)

Caller ID Operations
6. Press DEL/CH to delete.The handset
will give a success keynote and the dis-
play will show MEM DELETED .
VISUAL MESSAGE WAITING
INDICATOR (VMWI)
NOTE: This is a service that is provided
through your local telephone company.
If the C600 finds that there is voice message to
be retrieved, it will turn on the Message Waiting
Indicator (the ENTER key).
To retrieve the voice message, press the
ENTER key while the indicator is on.The hand-
set will go off-hook and dial the stored Voicemail
number.
CALLER ID INFORMATION
This function is turned off when EASY MODE
is set to ON during setup.
Caller Information
When somebody calls, the received caller infor-
mation is displayed on the LCD. If the call is
answered by this phone, this caller information is
considered old . Otherwise, the Caller ID infor-
mation will be stored in the call log. Information
which has not been reviewed will be considered
as new call .
The NEW CALL LED will blink.The top row
displays the time and date of the call.The second
row displays the caller s ID or is blank if there is
no information.The third row displays the
incoming telephone number. If the number is
longer than twelve (12) digits, the LCD will
toggle the displayed number between the first
12 digits and the remaining digits.
Receiving Call Waiting Caller ID
When you are on an existing call, you will
hear a beep and the display will show incom-
ing call waiting Caller ID information.
If you access the call waiting call, the Caller ID
information will disappear and the Time/Day
screen will appear.
If you do not access the call waiting call, the
Caller ID information will be transferred into
the Caller log.This caller information is con-
sidered old .
Unknown Call
If a call is from another country or the caller s
number is not available, UNKNOWN is
displayed and stored in the Caller ID log.
Blocked Call
If the number is blocked or withheld,
PRIVATE is displayed and stored in Caller
ID log.
Repeated Call
If this is a repeated call, it means the same
number called before and has not been
reviewed.
CALLER ID Review
If there is new call information, the MODE
button will flash RED.
During standby mode, press MODE button
once. LCD will display CID MODE and then
E
N
G
L
I
S
H
21