Clarity C600 - Manual (Page 19)

Memory Storage
Dialing a Phonebook Entry
1. Locate the phonebook record you wish to
call.
2. Press TALK or ENTER button to dial the
displayed number.
Deleting a Stored Number
1. Unit must be in standby mode and
display is showing a phonebook record.
2. Press DEL/CH key once.The LCD will
show DELETE?
3. Press DEL/CH to confirm.
4. The display will show MEM DELETED for
3 seconds together with a success keynote.
5. The display will show the next available
record or -NO RECORDS-.
■ If the memory location is empty,
pressing DEL key will have
no action.
■ This sequence will time-out after 30
seconds if no key is pressed.
Deleting All Stored Numbers
1. Unit must be in standby mode and dis
play is showing a valid phone record.
2. Press and hold DEL/CH button for 3
seconds to delete all phonebook records.
Display will flash DELETE ALL?.
3. Press DEL/CH to confirm. Display will
show -NO RECORDS- for 2 seconds
together with a success keynote.
■ If the memory location is empty,
pressing DEL key will have
no action.
■ This sequence will time-out after
30 seconds if no key is pressed.
Changing a Memory Number
1. Unit must be in standby mode only.
2. Press MODE key twice.The display will
show PHONEBOOK for 1 second and
then display the first available record.
3. Press the UP( ▲ ) or DOWN ( ▼ ) button
to go to the record to be changed,
e.g. ABC, 567
4. Press # KEY to change the phone record.
5. The display will show ENTER TO END
and the stored number 567 with the
blinking cursor after the digit 7.
6. Press any numeric key to add extra
numbers.
Or
Press DEL/CH key to move the cursor to
the digit 7.Then press other numeric key
to replace 7.
7. Press ENTER after finishing the digits.
8. The display shows ABC with the cursor
blinking after the character C.
9. Press any numeric key 2 to 9 to add
extra characters.
Or
E
N
G
L
I
S
H
19