Philips COLOR TV 27 INCH TABLE - Manual (Page 6)

A dding C hannels in M emory (M anually )
A uto Programming (see page 2
of the Quick Use Guide) adds
all the channels it can find (on
your Antenna or Cable TV system)
into the TV's memory. Add/Delete
Channels makes it easy for you to
add other channels, or drop
unwanted channels, from the list of
channels in the TV's memory.
C becin }
Press the MENU (M) button
on the remote, then press the
CHANNEL A or T buttons to
select the word CHANNEL with
the TV’s on-screen arrow.
<|> Press the CHANNEL NUM­
BER buttons on the remote to
select the channel you want to
SAVE (or DELETE.)
Press the (+) button to SAVE
the selected channel number into
memory.
Press the (-) button to DELETE
a channel from memory.
<$>
Press the STATUS button to
clear the screen after adding all
the channels you want.
Try it out. Press the
SCHANNELAT buttons.
The channels you SAVED should
appear. The channels you
DELETED should not appear.
Remember, you can also add the
VCR/AUX mode (see page 11)
into the TV’s channel memory.
Then by pressing the CH
A T
buttons you can quickly select the
Audio/Video Input jacks on the
rear of the TV.
NOTE: You can also add the VCR/AUX mode into
the TV's channel memory. Then you can quickly
select the Audio/Video Input jacks on the rear of the
TV by pressing the Channel AT bunons.
To “SAVE” the VCR/AUX mode into the TV’s
channel memory:
• With the on-screen menu displayed, press the CH
A or T button and select the INPUT control.
• Press the W or (-) bunon to place the TV in the
VCR/AUX mode.
• Press the CH A or T button to reselect the
CHANNEL control.
• Press the (+) button to “SAVE” VCR/AUX mode
into the TV’s channel scan memory.
• Press the STATUS button to clear the Menu from
the screen.
Try it out. Press the AT buttons to be sure the
VCR/AUX mode is present. (Should appear
between the highest and lowest broadcast channels
within your TV’s scan memory.)