Philips COLOR TV 27 INCH TABLE - Manual (Page 5)

How
TO S
et the
TV
for
C
able
TV
O
peration
Q
"A TOTE: If you went through
J. ▼ Setup (in your Quick Use
Guide), this task has already been
completed for you.
You need to make sure that the TV
is set to pick up either Cable TV
stations or Antenna signals. In
other words, the TV needs to
know whether you have connected
a Cable TV signal or a normal
antenna to its ANTENNA plug.
<
3
> Press the MENU (M) button
on the remote, then press the
CHANNEL
A or T buttons to
select the word CABLE with the
TV’s on-screen arrow.
Press the (-I-) button (on the
TV or the remote) to select either:
YES- If you DQ have Cable TV
connected to the TV.
Channels 1-125 can be
selected.
NO- If you have an Antenna
connected to the TV.
Channels 2-69 can be
selected.
<|> Press STATUS to clear the
0
screen.
S\i.\RT H elp
Try it out. Press
g CHANNEL AV buttons
and scan the channels.
Remember, the TV has been set at
the factory to select certain chan­
nel numbers. See the following
page on how to set the TV to
select the channels in your area.
SWART PECT
Si;FiF
SIflJtSTSSD
STEREO
iKPin
DOABLE