Char-Broil 463210511 - Manual (Page 22)

11
Qty: 2
1/4-20x1/2"
Machine Screw
Qty:
#10-24x1/2"
Machine Screw
5
Qty: 3
#10-24 Hex Nut
Qty:
#8-32x3/8”
Machine Screw
2
22
Repeat step 8(A)on left side shelf.
.
screw through bezel and into valve. Tighten both securely.
Unscrew the hardware’s from sideburner. Place sideburner into shelf (D). Make sure to insert valve into sideburner tube. Attach
sideburner to drip pan with the screws and lock washers unscrewed from sideburner just now.
Attach sideburner ignitor wire to electrode as shown (E ).
Place left side shelf to the left side of firebox .
Tighten the pre-installed screws to the left side shelf (B)
Attach left side shelf to firebox with 1/4-20x1/2” screws on the upper holes.Attach left fascia to control panel with #10-24x1/2” screws.
Position valve behind fascia and line up holes (C).
Insert (1) of the #8-32x3/8” screws, but do not fully tighten. Slip bezel under inserted screw and position as shown (C).
Line up other hole and insert (1) #8-32x3/8”
(A)
A
B
C
Control Knob Bezel
Sideburner Valve
Sideburner
Sideburner Valve
D
E
Sideburner Ignitor Wire
e u n
e
Sid b r er Tub
Valve