Char-Broil 463210511 - Manual (Page 17)

ASSEMBLY
Place legs as shown.NOTE:Left leg assembly has large holes on ends of legs. Attach center brace, left front and left rear
leg with 1/4-20x1/2" screws,7mm Flat
Washer and 7mm Lock Washer on each side.
Place bottom shelf with cut out hole for LP cylinder next to legs with axle holes.
Attach to right and left leg assemblies with 1/4-20x1/2" screws, 7mm Flat
Washer and
7mm Lock Washer on each side.
1
2
Qty:
1/4-20x1/2"
Machine Screw
12
Qty: 12
7mm Flat Washer
Qty: 12
7mm Lock Washer
Qty:
1/4-20x1/2"
Machine Screw
4
Qty: 4
Flat 7mm Washer
Qty: 4
Lock 7mm Washer
Rear
Front
Bottom
Shelf
Left Leg
Assembly
Right Leg
Assembly
Right Front Leg
Right Rear Leg
Left Front Leg
Left Rear Leg
Center Brace
Upper Brace,
Left Cart
Upper Brace,
Right Cart
Attach upper brace, left leg assembly which was assembled previously with 1/4-20x1/2" screws,7mm Flat Washer
and 7mm Lock Washer on each side. Note orientation of Upper Braces as shown in image.
The assembly method of right leg assembly is similar to left leg assembly.
17