Cisco IP Phone 7961G-GE - Manual (Page 24)

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
4-24
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager
OL-11528-01
Ethernet Configuration Menu
The Ethernet Configuration menu includes the Span to PC Port option. This
option indicates whether the phone will forward packets transmitted and received
on the network port to the access port.
Recording Tone
Remote Volume Indicates the loudness setting for the
beep tone that the remote party
receives. The remote party is the party
who is on a call with the party whose
phone has the Recording Tone option
enabled.
Range: 0 percent to 100 percent. (0
percent is -66 dBM and 100 percent is
-3 dBM.)
Default: 84 percent (-10dBM)
See also: Recording Tone
Use Cisco Unified CallManager
Administration > Device > Phone >
Phone Configuration.
Recording Tone
Duration Indicates the length of time in
milliseconds for which the beep tone
plays.
If the value you configure here is less
than one third the interval, then this
value overrides the default provided by
the Network Locale.
Range: 0 to 3000
Note For some Network Locales that
use a complex cadence, this
setting applies only to the first
beep tone.
See also: Recording Tone
Use Cisco Unified CallManager
Administration > Device > Phone >
Phone Configuration.
Table 4-6 Media Configuration Menu Options (continued)
Option Description To Change