Cisco IP Phone 7961G-GE - Manual (Page 22)

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
4-22
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager
OL-11528-01
Recording Tone Indicates whether a recording tone
(often referred to as a beep tone) is
enabled or disabled for the phone. If the
recording tone option is enabled, the
phone plays the beep tone in both
directions of every call, regardless of
whether the call actually gets recorded.
The beep tone first sounds when a call
is answered.
You may want to notify your users if
you enable this option.
Default: Disabled
Related Parameters:
• Recording Tone Local Volume
• Recording Tone Remote Volume
• Recording Tone Duration
Note Other related
parameters—Beep tone
frequency in hz, the length of
the beep tone (called duration),
and how often the beep tone
plays (called interval)—are
defined on a per-Network
Locale basis in the xml file that
defines tones. This xml file is
usually named tones.xml or
g3-tones.xml.
Use Cisco Unified CallManager
Administration > Device > Phone >
Phone Configuration.
Table 4-6 Media Configuration Menu Options (continued)
Option Description To Change