OmniSistem Beta 3 – R4/R8 - Manual (Page 15)

COMPACT LINE ARRAY SOUND REINFORCEMENT SYSTEM
13
Figure 1
SOFTWARE APPLICATION GUIDE
How to get the software
The software is stored in the CD with equipment packaging. The latest version also may be downloaded
from the company website.
Software installation
System requirement: Microsoft Windows 98/XP or above version. Display resolution should be 1024*768
or above. The computer must have a RS-232 port or USB port. Run the
file, according computer's setup guide to install the control software.
"
"
Active Speaker Controller
(V1.34).msi
Equipment connection
Connect the equipment to computer by RS-232, if the computer has not the RS-232 interface, you may
use USB port (after connection, the computer will indicate that new device is found, then you may install
the USB driver located in driver directory of the CD.
" "
Software operation guide
1. Run the software(Active Speaker Controller) from program menu in the windows start button, the
following interface will be shown, See Figure 1:
This interface includes all function modules about the equipment, menu description as following:
1.1> File: Open the configuration files, or Save current configuration as a file into computer;
1.2> Communications: Connect ("Enable Communications") or Disconnect ("Disable
Communications") the equipment, Operation details refer to following description.