NORAC UC5-BC-WK01 - Manual (Page 26)

23
Figure 27: Valve Module Bracket Installation
5. Connect cable C02 to the valve module CANbus from the 3-way coupler (E10). Route
cable C03 from the other CANbus connector to the 8-way coupler (E11).
6. With the valve module securely mounted to the valve block, connect the valve cables (C10),
to the valve coils. Insert the 2-pin plugs (P01) into the unused 2-pin connectors on the
valve module.
7. Connect the temperature probe to the valve block using the supplied 3/8” x 1/2” hex bolt.
Figure 28: Valve Module - Valve Coil Connections
Tank Port
Pressure Port
Sense Port
Left Tilt Ports
Right Tilt Ports