NORAC UC5-BC-RG12 - Manual (Page 12)

9
4.6 Mounting Brackets for 120’ Boom
If the boom is an early 2012 120’ production model, the linear damper mounting brackets may
not have been installed at the factory. The following mounting brackets are needed:
Part Number Name Quantity
44750-1 BRACKET MOUNTING LINEAR ROLL ROGATOR LT - UPPER 1
44750-2 BRACKET MOUNTING LINEAR ROLL ROGATOR LT - LOWER 1
Do not use high speed power tools/drills when installing hardware.
The use of dielectric grease is not recommended on any NORAC electrical
connections.
To ensure all stainless steel hardware does not gall or seize apply a light coating of
the supplied Permatex Anti-seize grease to all threaded parts upon installation.
Permatex Anti-seize lubricant is preferred, but other similar anti-seize products
may be used.