beautypg.com

3 valve block mounting – NORAC UC5-BC-RG06 User Manual

Page 32

background image



29

Figure 27: NORAC Valve Block Details

10.3 Valve Block Mounting

1. A suitable mounting location for the valve block on the Rogator is illustrated in Figure 28.

2. Insert the threaded rod into the block and use a hex nut to hold the rod. The block holes

are 3/8” NC-1” deep. If bolts are used instead of the threaded rod, ensure the bolts thread
in at least 3/8”.

3. Use the remaining hardware to secure the block to the sprayer.

4. Cut off excess threaded rod, if necessary.

Figure 28: Valve Block Mounting

This manual is related to the following products: