beautypg.com

2 main lift sensor installation – NORAC UC5-BC-HD08A User Manual

Page 13

background image



10

5.2 Main Lift Sensor Installation

The general mounting rule for UC5 ultrasonic sensors must be followed for the
main lift sensor.

Figure 7: Main Lift Bracket Assembly

1. The Main Lift bracket may need to be cut down for this installation. See Figure 8.

2. Mount the ML bracket (Item B11). Ensure sensor cable is routed properly and securely

fastened.

3. Mount the Ultrasonic sensor to the bracket. Ensure the sensor has a clear view of the

ground. Ensure sensor cable is securely fastened with cable-ties.

Figure 8: Main Lift Bracket Installed

Cut 4” (102mm)

off of tube

Cut 1-2” (25-

50mm) off of tube

See also other documents in the category NORAC Gardening equipment: